150J3W High Pressure Plunger Pump |
|
 |
Applications:
Flow Rates to 27 GPM |
JETECH® 150J3W triplex plunger pump represents a new dimension of rugged versatility in high pressure pumping equipment. Designed to meet the demanding requirements of chemical injection, oil field, API processing, reverse osmosis, mining and water blasting applications, the pump is engineered to provide long dependable service and ease of field maintenance.
Liquid-End Features
JETECH® Advanced Design ("AD ") liquid-ends are precision-machined to exacting tolerances and feature segmented cylinders of the radial compression single-bore design. The radial compression single-bore feature eliminates undesirable bore intersections and cylinder tensile stresses which are known to be the major factors leading to pump cylinder failure.
Single-Spring Valves
JETECH®'s unique single-spring radial compression inline valve cartridge design eliminates the traditional discharge valve spring required in other plunger pumps. Since only one spring serves both suction and discharge valves, the single-spring feature effectively reduces the possibility of valve spring breakage up to 50% over two-spring units.
Plungers
The plungers are manufactured to exacting tolerances of nominal OD (+0.000) / (-0.001) inches. A choice of ceramic or JETECH®'s 060 NICKEL-CHROME-BORON fused hard coatings is available. Minimum coating thickness is 25 mils and minimum surface hardness is 60 Rc. Plungers are ground to a smooth surface finish of 8 RMS to provide long packing life.
Packing
The pump is designed to accommodate a broad spectrum of packing arrangements. The standard arrangement is the non-adjustable spring loaded style which can be fitted with vee, square, or JETECH® flat-backed chevron rings to withstand high pulsing loads.
Stuffing Boxes
The stuffing boxes of the 150J3W pump are engineered as part of the segmented cylinders and are designed without radii. This important esign feature is essential to eliminate radii stress points which are the prime source of stuffing box cracking.
Power-End Features
Bearings
The main end bearings are the tapered roller design to withstand high loads. The crankshaft journal bearings are automotive type with steel backed inserts.
Maintenance Features
The liquid-ends of the 150J3W
pump offer many
ease of maintenance features. The segmented liquid cylinders are held to a common
manifold by four through manifold bolts that screw into a back cylinder
holding plate. The removal of each cylinder is a simple task which requires
only the unscrewing of the plunger from the pony rod and the removal of
the four through-manifold bolts, which are accessible from the front side of
the manifold. Packing, plunger, valves and cylinder changes can be accomplished
in short time spans and do not require special skills of the workman. In
fact, the valve cartridge can be removed from the pump without loosening
the plunger or disturbing the packing. All that is required is to loosen
the four through-manifold bolts and then slide the back of the
cylinder approximately two inches toward the power-end. The valve cartridge can them be
easily lifted from between the manifold and cylinder. This feature is great
for quick suction and discharge valve inspection or component changing.
When it comes to ease of field maintenance, no other through-bore type pump
comes close to the exceptional versatility of the 150J3W pump.
Specifications
| Pump Model | Type | Plg.-Load Rating | Max. RPM | Stroke Length | Nominal Horsepower |
| 150J3W | Triplex | 10,000 Lbs. | 500 | 3-3/4" | 150 |
| Valve Area - In2 | |||
| UH - Cylinder | Super H - Cylinder | ||
| Suct. | Disc. | Suct. | Disc. |
| 0.123 | 0.079 | 0.28 | 0.15 |
Capacity
| CAPACITY IN GPM - 100% VOLUMETRIC EFFICIENCY | ||||
| 40k UH - CYLINDER | ||||
| PUMP SPEED |
9/16" DIA. 40,000 PSI |
5/8" DIA. 30,000 PSI |
3/4" DIA. 20,000 PSI |
7/8" DIA. 15,000 PSI |
| RPM | GPM | GPM | GPM | GPM |
| 100 | 1.20 | 1.50 | 2.15 | 2.92 |
| 200 | 2.40 | 3.00 | 4.30 | 5.85 |
| 300 | 3.60 | 4.50 | 6.45 | 7.78 |
| 400 | 4.80 | 6.00 | 8.60 | 11.68 |
| 450 | 5.40 | 6.70 | 9.70 | 13.20 |
| 500 | 6.00 | 7.50 | 10.70 | 14.70 |
| CAPACITY IN GPM - 100% VOLUMETRIC EFFICIENCY | |||||||
| 20k H - SUPER STANDARD CYLINDER | |||||||
| PUMP SPEED |
3/4" DIA. 20,000 PSI |
7/8" DIA. 15,000 PSI |
15/16" DIA. 13,000 PSI |
1" DIA. 11,000 PSI |
1-1/16" DIA. 10,000 PSI |
1-1/8" DIA. 9,000 PSI |
1-3/16" DIA. 8,000 PSI |
| RPM | GPM | GPM | GPM | GPM | GPM | GPM | GPM |
| 100 | 2.15 | 2.92 | 3.30 | 3.83 | 4.31 | 4.84 | 5.40 |
| 200 | 4.30 | 5.85 | 6.60 | 7.65 | 8.62 | 9.68 | 10.80 |
| 300 | 6.45 | 7.78 | 9.90 | 11.47 | 12.94 | 14.52 | 16.20 |
| 400 | 8.60 | 11.68 | 13.20 | 15.30 | 17.26 | 19.36 | 21.60 |
| 450 | 9.70 | 13.20 | 14.80 | 17.21 | 19.40 | 21.78 | 24.30 |
| 500 | 10.70 | 14.70 | 16.50 | 19.12 | 21.60 | 24.20 | 27.00 |
BHP=GPMx PSI / 1542
Note: JETECH, Inc. reserves the right to alter the pump design without notice.